
Breaking the I3 Physical Barrier.
150 km/h. 89° vertical FPV dives. Full gimbal torque under load. The DJI Inspire 3, unlocked — without losing a single feature of the stock camera ecosystem.
Top Speed
150km/h
Dive Angle
89°
Gimbal Mode
Unlocked100%
01 / The Problem
The Inspire 3 is incredible — until you hit its limits.
The I3 is a world-class cinema platform, but DJI's firmware caps speed, smooths pilot input, and restricts descent rate and aggressive movement to protect the stock stack. Outside a narrow envelope, the airframe can do far more than the controller will allow.
Speed Ceiling
Firmware-capped at ~94 km/h to protect the stock ESC and battery — far below what the airframe can physically handle.
Piloting Accuracy
Smoothed sticks, no acro authority, and a latency budget tuned for cinematic moves — not precision flying.
Movement Limits
Restricted descent rate, shallow dive angle, and a conservative tilt envelope keep aggressive maneuvers off the table.





02 / The Solution
Custom electronics.
Original airframe.
We replace the original flight controller stack with a custom Betaflight system wired into the stock I3 airframe — unlocking full speed, descent rate, and pilot precision while keeping the cinema gimbal, O3+ transmission, and dual-operator workflow intact. The unique part: our deception board can actually arm the Inspire 3 brain so it believes it's flying, keeping the gimbal in High-Torque Mode and O3+ at full transmission power.
FPV Camera
Dedicated pilot camera feeding the O4 Pro link — sub-20 ms latency for high-speed dives and precision line work, independent of the cinema gimbal.
04 / Side by Side
Stock I3 vs. Xspire I3.
03 / Cross the Line
Past the wall. Into the Xspire Zone.
Watch the needle break the 100 km/h ceiling and lock at sustained 150 km/h — repeatable, telemetry-verified, gimbal still armed.
Stock Limit
94 km/h
XSPIRE
150 km/h
Velocity
000
km/h
05 / Dual-Operator Synergy
Two stacks. One airframe. Zero compromise.
Pilot flies Betaflight precision. Gimbal Op flies the DJI ecosystem they trained on. Both run in parallel — neither degrades the other.
Operator A
Pilot · Betaflight FPV
- Custom rates · acro mode · pretuned PIDs
- Full 89° vertical dive authority
- Sub-30ms control loop, full FPV racing drone controls
- FPV goggle feed via dedicated VTX
Operator B
Gimbal Op · DJI Ecosystem
- Stock DJI RC Plus & Pro Imaging app
- O3+ transmission, full focus pull, peaking, LUTs
- High-Torque mode armed even at 150 km/h
- No retraining — same workflow as stock I3
06 / In the Field
Where the envelope matters.
Cinematic Chase
Keep up with rally cars, motorcycles, speedboats. Stock I3 falls behind at 94 km/h — Xspire holds frame at 150.
FPV Aerial Action
Acro-rate maneuvers with cinema-grade glass. Betaflight precision, full-size sensor.
High-Speed Tracking
Subject lock at sustained pace. Gimbal stays armed in High Torque, no tilt drift.
Dive Sequences
Full 89° vertical descents. Engineered shell stress envelope, no recalibration.
03 / Deployment Tiers
Pricing & Clearance
Two paths into the Xspire envelope. Per-operator builds, not mass production.
Every Xspire Includes
- Custom Deception Board (armed-brain trick)
- Xnova X-Class motors + APD 120F(3) X ESCs
- Betaflight flight controller, individually tuned
- DJI O4 Pro pilot link + O3+ cam-op link preserved
- Per-unit test flight & calibration signoff
- 12-month Xspire hardware warranty + direct support
- 2-day on-site operator training
Tier 01
Fully Assembled Xspire
Turn-key tactical unit. Airframe sourced, built, calibrated, and signed off by our team.
Per Unit
25,500CHF
- Airframe
- Sourced by Xspire (new)
- Lead time
- ~6 weeks from order
Tier 02 · Operator's Choice
Bring Your Own Inspire 3
Ship us your I3 — we strip, retrofit, and recertify.
Per Unit
16,500CHF
- Airframe
- Supplied by operator (new / refurb only)
- Lead time
- ~6 weeks from I3 receipt
Unit must be new or factory-refurbished. Used units are not accepted — we cannot guarantee airframe integrity on pre-flown hardware.
All prices exclude VAT and shipping · Pricing locked at order confirmation
07 / FAQ
Standard inquiries.
08 / Final Brief
This is not a product.
It's clearance.
Xspire is built per-operator, not per-order. Tell us your mission profile and we'll confirm whether you qualify.